In this section
Project Overview
Find, filter, and open the projects in your organization.
Create a new project
Country, name, building type, and the calculation the project is judged against.
Project Dashboard
Emissions against your limit value, mapping progress, and the charts behind them.
3D model viewer
Inspect an element, colour the model by impact, and find what is not mapped.
Material Mapping
Link inventory items to EPDs and constructions — by hand, automatically, or with AI.
Transport Mapping
Set haul distances so A4 emissions are calculated per material.
Waste Sorting
Assign materials to waste categories for end-of-life calculations.
Clone a project
Copy the current state into a new project to explore a variant safely.
History
Every change as a version you can restore.
Revisions
Name the states worth keeping, and switch the project between them.
Reports
Generate a formatted LCA report, with your own description and notes.
Project Settings
Areas, life-cycle stages, classification, site energy, members, and integrations.
A typical run through
1
Create the project
Country, name, building type, calculation type. See Create a new project.
2
Complete the settings
Areas and, depending on the calculation type, classification, transport, installation, and energy use. See Project Settings.
4
Map materials, transport, and waste
Material Mapping first — transport and waste are calculated from what is mapped.
5
Read the results and save a revision
Check the dashboard, name the state you want to keep as a revision, and issue an LCA report from it.